The colors worked so well in that jacket fabric...
What yarn/sett did you use and what did you do to change the draft when you wove your Mother's favorite table runner?
Find out in an instant! However you choose to file them these project record sheets can record the the information to do it again and to learn from the experience. Includes spots for the 4/8 shaft draft, tie up and treadling as well warp & weft calculations worksheet and a spot of honor for the sample.Item Number: 52000000.
Place the Holds-All near your loom or work space to store all the multiple accessories and fibers. So many tools in one convenient and good looking piece of furniture. It is designed to allow you to fasten a hand bobbin winder onto it, or use it as a winding station and doubling stand. It also contains a spool rack that holds up to 10 spools or bobbins. Maple. Dimensions:
Width: 34 1/2"
Depth 11 1/2"Item Number: 62638010.
Schacht's sturdy winding station is designed to accomodate all your winding tools: ball winders, swifts and bobbin winders. Cone & spool rack for up to 8 cones or spools.30"w, 35.5"h, 18"d. Weight 17 lbs. Table top width 8". Extension arm for umbrella swift extends 19"-22" and can be at an angle. Counters and winders are not included.Item Number: 64050500.
A Wraps per inch(WPI) measures the number of times that a yarn can be aligned in gently adjacent rows within 1 inch. This will determine the gauge (thickness) of the yarn. Includes a WPI Reference Knit-Kard.Item Number: 64890100.
A handy gadget for all your fringing needs — rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps, let the yarns twist back on themselves and knot.Item Number: 68092000.
A handy gadget for all your fringing needs — rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps, let the yarns twist back on themselves and knot.Item Number: 68093000.
A handy gadget for all your fringing needs — rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps one at a time holding the ends together. Let the yarns twist back on themselves and then knot or whip the bundle. The Leclerc fringe twister is an economical alternative to our handcrafted fringe twister.Included item numbers: 61030000, 61030200, 61030300, 61030300
You'll find this magnifying tool useful for examining weave structures or checking your consistency at the loom. The 6X magnifier makes it easy to count individual threads. All new with better magnification. This pick counter is also sometimes called a Linen Tester.Item Number: 68040000.
Vusion is a light and magnifier on two fully adjustable arms. It has 2 large LED lights that never need replacing, an optical grade lens that distributes light evenly, a detachable magnetic cradle for use as a free standing light and is powered by 3 AAA batteries (included). Silver.Item Number: 88031010.
Mighty Bright hands free round frame with lighted 4" lens, 1.5X power lens with 3X power insert lens, sharp distortion free view, cushioned braces and adjustable tie and is powered by 1 AA battery (included) Black.Item Number: 88031020.
Many weavers give a cold shoulder to the sampling process, warping their loom and crossing their fingers that everything will turn out just right. Next time, before throwing such caution to the wind, needle-weave a sample on this handy Sett Tool. Cut the two samples off the sett tool (one each-front and back) and you can keep one as is and wash the other to test for shrinkage or bleeding. The Sett Tool measures 3" overall and comes with a needle and directions.Item Number: 68090000.
Cutting fabric strips for hooking has never been so easy. Just clamp the Rigby cutter a table top and feed cloth into the cutter while you turn the crank. Perfect strips every time. Cut three, four or five strips at a time depending on the width of the strips desired. Comes with 1/4" head. Cutter heads also available are – 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32" , whichever suits your needs. If you prefer the choice to put two different heads on the shaft to eliminate the need to change heads for different strip widths purchase the Model D. H is the same as Model D but with only one cutterhead. Please note: This item has a lengthy delay which may be many months.Included item numbers: 6865000B, 6865000C, 6865000D, 6865000H, 6865000H
Single Cutter head replacement for Model C.
Please note: This item sometimes has a lengthy delay which may be many months.Item Number: 6865001C.
Finger for #8 - 1/4 cutter head. This keep the strips from wrapping around the cutter-head. One comes with the Model “H”, matching the size of the cutter. Additional cutters of different sizes need matching cleaning fingers. Please note: This item has a lengthy delay which may be many months.Included item numbers: 6865020F, 6865030F, 6865040F, 6865050F, 6865060F, 6865070F, 6865080F, 6865080F
#8 cutter head makes 3 strips 1/4 inch. Fingers are sold separately. Please note: This item has a lengthy delay which may be many months.Included item numbers: 68650300, 68650400, 68650500, 68650600, 68650700, 68650800, 68650800